SAN-Ready
2Gbit Fibre Channel to SATA RAID
SANCOME 2900 SPECIFICATIONS
MODEL RAID 2900F/ RAID 2900S
Host Interface :2 Gbit (200 MB/s) Fibre Channel, 2 SFP Connectors
Ultra SCSI 320/160 MB/s
System Architecture: 2Gbit Fibre Channel or Ultra SCSI to SATA disks
RAID Controller: Single RAID Controllers
Hot-Swap Components :Hard drives, power supplies, cooling fans,
resilient disk
Redundant Components :Hard drives, power supplies, cooling fans,
resilient disk
Error Notification (SAF-TE) :Audible alarm, status LEDs, SNMP traps,
network messaging, remote paging
SAF-TE Compliance: Yes
Drive and Capacity
Drive Interface: Serial ATA
Drive Types: Low-profile (1-inch high) disk drives
Drive Capacity :120, 160, 200, 250, 300GB or 400GB (7,200, 10KRPM)
Maximum Cap/Enclosure :6.4 TB (16 x 400GB)
Maximum Cap/Daisy-Chain: Up to 18 TB on a daisy-chain
Number of RAID Controllers :1 Fibre Channel RAID controllers/ Ultra
SCSI RAID controller
Integrated RAID Controllers
RAID Levels: 0, 1, 3, 5, 10, 30, 50, and JBOD
Cache Memory: 128MB of memory per controller
Number of Processors: One Power PC processor
Drive Interface: Serial ATA
LUN Support: Up to 8 Arrays with a maximum of 64 LUNs
Power Requirements
Input Voltage :100 - 240 VAC (auto-sensing)
Input Frequency: 50 - 60Hz
Input Curren:t 3.9 Amperes per supply
Power Supply Rating: 2 - 450 watt hot-swappable power supply units
Maximum BTUs per Hour :1,194 BTUs per system
Power Source: 2 independent power cords
Certification Compliance
Emissions Requirements: FCC Part 15 Class A, EN55022-A
Agency Certification :UL1950, CSA C22.2 #950, TUV/EN60950
CE Compliance : 89/336/EEC EMC Directive
|