SAN-Ready
2Gbit Fibre Channel to SCSI RAID
SANCOME 3600 SPECIFICATIONS
MODEL RAID 3600F/ RAID 3600S
Host Interface 2 Gbit (200 MB/s) Fibre Channel, 2 SFP Connectors/
Ultra SCSI 320 / 160 MB/s
System Architecture: Fibre Channel to Ultra SCSI 320MB/s
RAID Controller: Single RAID Controllers
Hot-Swap Components :Hard drives, RAID Controllers, power supplies,
cooling fans, resilient disk
Redundant Components :Hard drives, power supplies, cooling fans,
resilient disk
Error Notification (SAF-TE) :Audible alarm, status LEDs, SNMP traps,
network messaging, remote paging
SAF-TE Compliance :Yes
Drive and Capacity
Drive Interface: Ultra SCSI 320MB/s
Drive Types :Low-profile (1-inch high) disk drives
Drive Capacity :18GB, 36GB, 73GB or 146GB (7,200, 10K and 15K RPM)
Maximum Cap/Enclosure: 2.0 TB (14 x 146GB)
Maximum Cap/Daisy-Chain: Up to 6 TB on a SCSI Channel Loop
Number of RAID Controllers: 1 Fibre Channel RAID controller/ Ultra
SCSI RAID Controller
Integrated RAID Controllers
RAID Levels: 0, 1, 3, 5, 10, 30, 50, and JBOD
Cache Memory :128MB of memory per controller
Number of Processors: One Power PC processor
Drive Interface: Ultra SCSI 320 Channel
LUN Support: Up to 8 Arrays with a maximum of 64 LUNs
Power Requirements
Input Voltage: 100 - 240 VAC (auto-sensing)
Input Frequency :50 - 60Hz
Input Current: 3.5 Amperes per supply
Power Supply Rating: 3- 350 watt hot-swappable power supply units
Maximum BTUs per Hour: 1,194 BTUs per system
Power Source: 3 independent power cords
Certification Compliance
Emissions Requirements:FCC Part 15 Class A, EN55022-A
Agency Certification :UL1950, CSA C22.2 #950, TUV/EN60950
CE Compliance :89/336/EEC EMC Directive
|