SANCOME RAID 4300


			Storage Application Solutions Provider
			Storage Application Solutions Provider		. HOME . CONTACT US . SEARCH
					. HOME . CONTACT US . SEARCH

SANCOME PRODUCTS

NAS Products

— NAS800
— NAS1600A
— NAS2400

SAN-NAS Convergence

— NAS Gateway
— NAS 1000
— NAS 2000
— NAS3000C/4000C

SAN Products

— FC RAID5200
— FC RAID4800
— FC RAID4300
— FC RAID3600
— FC RAID2900
— Brocade switches
— Qlogic HBA

New Products

— NAS Gateway
— NAS2400
— FC RAID4800

Data Backup

— Bakbone software
— Veritas software
— Superloader

	Partners Login:

	Password:

SAN Products

· 2Gbit (200 MB/s) Fibre Channel Host and Drive connectivity
· Single RAID Controller or Dual RAID Controller Configurations both with
..... Four independent host connections
· 1GB of write-protected cache per controller pair
· Automatic Cache Tuning provides maximized I/O throughput for heavy random
.....and write-intensive data trends
· Supports the Industry's fastest and largest disk drive technology
· Available in Single or Dual RAID configurations for complete disk drive and
..... RAID controller failure protection
· Automatic, host-transparent RAID controller failover and fail back
· Separate Host I/O connection from the RAID Controller for non-disruptive
..... RAID Controller replacement
· Redundant, hot-swap, host and drive I/O modules for continuous host
..... connectivity
· Redundant, hot-swap, load-sharing power supplies with dual independent AC
..... power cords
· Redundant, hot-swap cooling fans designed with a unique airflow to cool high
..... speed RPM drives and ensure data is protected
· Integrated Battery Backup module for Mirrored Write Cache data protection
· Automatic flush to disk write cache vaulting
· Industry-Standard SES chassis design monitors & reports status of all
..... components
· Configure up to 512 RAID partitions to serve up to 512 servers
· Grow a logical volume within the RAID up to 16 times even if the available
..... capacity in not contiguous
· Read-Only and Read-Write LUN assignment is built into the RAID Controller
· Daisy-Chain multiple chassis for large, multi-terabyte storage requirements
· Multiple host connections for serving data to multiple servers
· Supports a wide variety of disk drive capacities

RAID 4300

SAN-Ready 2Gbit Fibre Channel RAID

SANCOME 4300F SPECIFICATIONS
Host Interface: 4 x 2 Gbit (200 MB/s) Fibre Channel, SFP Connectors
System Architecture :2Gbit Fibre Channel (Host and Drive Channels)
RAID Controller: Single or Dual RAID Controllers
Hot-Swap Components :Hard drives, RAID Controllers, power supplies, cooling fans, resilient disk and host I/O cards
Redundant Components: Hard drives, RAID Controllers, power supplies, cooling fans, resilient disk and host I/O cards
Error Notification (SAF-TE): Audible alarm, status LEDs, SNMP traps, network messaging, remote paging
SAF-TE Compliance: Yes

Drive and Capacity
Drive Interface :2 Gbit Fibre Channel
Drive Types :Low-profile (1-inch high) disk drives
Drive Capacity: 18GB, 36GB, 73GB or 146GB (7,200, 10K and 15K RPM)
Maximum Cap/Enclosure :1.7 TB (12 x 146GB)
Maximum Cap/Daisy-Chain :Up to 14 TB on a single Fibre Channel Loop
Number of RAID Controllers :1 or 2 Fibre Channel RAID controllers can be integrated. (SANCOME 4310F - Single Controller and SANCOME 4320F - Dual Controller)

Integrated RAID Controllers
RAID Levels: 0, 1, 5, 10, 50, and JBOD
Cache Memory :512MB of memory per controller
Number of Processors: One 600MHz processor per controller
Drive Interface: 2 Gbit Fibre Channel
LUN Support :Up to 64 Arrays with a maximum of 512 LUNs

Power Requirements
Input Voltage :100 - 240 VAC (auto-sensing)
Input Frequency :50 - 60Hz
Input Current: 3.0 Amperes per supply
Power Supply Rating: 2 - 350 watt hot-swappable power supply units
Maximum BTUs per Hour :1,194 BTUs per system
Power Source: 2 independent power cords

Certification Compliance
Emissions Requirements: FCC Part 15 Class A, EN55022-A
Agency Certification: UL1950, CSA C22.2 #950, TUV/EN60950
CE Compliance :89/336/EEC EMC Directive