| SAN-Ready
2Gbit Fibre Channel RAID SANCOME 4800F SPECIFICATIONS
Host Interface:4x 2 Gbit (200 MB/s) Fibre Channel, SFP Connectors
System Architecture: 2Gbit Fibre Channel (Host and Drive Channels)
RAID Controller :Dual RAID Controllers
Hot-Swap Components: Hard drives, RAID Controllers, power supplies,
cooling fans, resilient disk and host I/O cards
Redundant Components :Hard drives, RAID Controllers, power supplies,
cooling fans, resilient disk and host I/O cards
Error Notification (SAF-TE) :Audible alarm, status LEDs, SNMP traps,
network messaging, remote paging
SAF-TE Compliance :Yes
Drive and Capacity
Drive Interface: 2 Gbit Fibre Channel
Drive Types: Low-profile (1-inch high) disk drives
Drive Capacity: 18GB, 36GB, 73GB or 146GB (7,200, 10K and 15K RPM)
Maximum Cap/Enclosure :2.0 TB (14 x 146GB)
Maximum Cap/Daisy-Chain :Up to 16 TB on a single Fibre Channel Loop
Number of RAID Controllers: 2 Fibre Channel RAID controllers
Integrated RAID Controllers
RAID Levels :0, 1, 5, 10, 50, and JBOD
Cache Memory: 512MB of memory per controller
Number of Processors: One 600MHz processor per controller
Drive Interface: 2 Gbit Fibre Channel
LUN Suppor:t Up to 64 Arrays with a maximum of 512 LUNs
Power Requirements
Input Voltage: 100 - 240 VAC (auto-sensing)
Input Frequency: 50 - 60Hz
Input Current :3.5 Amperes per supply
Power Supply Rating: 2 - 400 watt hot-swappable power supply units
Maximum BTUs per Hour: 1,194 BTUs per system
Power Source: 2 independent power cords
Certification Compliance
Emissions Requirements: FCC Part 15 Class A, EN55022-A
Agency Certification: UL1950, CSA C22.2 #950, TUV/EN60950
CE Compliance :89/336/EEC EMC Directive
System Physical Characteristics
Rackmount
Width: 17.65" (44.83 cm)
Length :20.25" (51.44 cm)
Height: 5.25" (13.51 cm) (3U)
Weight: 41 lbs. (18.45Kg) w/o drives
Manageability: VT-100 Command Line Interface for local CLI configuration
only.
Service & Support :Various service options are available. Contact
your local sales representative for details
|